Turning diameter 700 mm
turning length 1,250 mm
Total power requirement 115 kW
MAIN SPINDLE (direct drive, adjustable hollow shaft motor)
Main spindle size DIN 55026/ 55021
Material passage max. 102 mm
Speed max. 3,000 1/min
Front bearing diameter 170 mm
Power 100/40% ED 53 / 68 kW
Torque 675 / 900 Nm
C-axis resolution 0.001 °
Locking for coarser roughing work 2.5 °
FULL CLAMPING CYLINDER
Adjustment range for clamping pressure device for full clamping cylinder 10-80 bar
Bar capacity 102 mm
Stroke 48 mm
Clamping force max. tension 10900 dN
Clamping force pressure 12000 dN
TOOL CARRIER 1
Number of driven stations in tool carrier 1 12
Working path X-axis (glass scale) 320 mm
Working path Z-axis (encoder) 1,250 mm
Z-axis travel 1,250 mm
Rapid traverse speed X/Z 15 / 30 m/min
Number of driven stations in the disk turret 12
Speed of the driven tools 6,000 rpm
Torque 35 Nm
Feed force X/Z 12,000 / 15,000 N
Ball screw Ø in X-axis 40 mm
Ball screw Ø in Z-axis 50 mm
TOOL CARRIER 2
Number of stations in the turret 10
Working path X-axis (glass scale) 212 mm
Working path Z-axis (encoder) 1,250 mm
Rapid traverse speed X/Z 20/ 40 m/min
Feed force X/Z 8,600/ 14,000 N
Tool holding system DIN 69880-40x63
Ball screw Ø in X-axis 40 mm
Ball screw Ø in Z-axis 50 mm
REITSTOCK (NC-controlled)
Center distance 1,250 mm
Working path 1,340 mm
Rapid traverse 7.5 m/min
CLAMPING DEVICE MAIN SPINDLE
Three-jaw chuck - RÖHM Duro-NC 320-91
Jaw stroke 10.1 mm
Total clamping force 160 kN
Max. speed 3,200 l/min
Material passage 91 mm
Total rated current 200 A
Operating voltage 400 / 50 V / Hz
Machine dimensions approx. (LxWxH) 5,345 x 2,360 x 2,491 mm
Machine weight approx. 15,000 kg
Full clamping cylinder, SINS-140, hydraulic, with analog clamping stroke monitoring
3-jaw chuck RÖHM Duro-NC 320-91 for size 11 main spindle
TX8i control unit
Glass scale on the X-axis
Air supply through the turr