Double Column and Bridge Type Machining Center
Table Size (L × W) 3,000 mm × 1,500 mm
Table Load Capacity 12,000 kg
Table to Spindle Nose Distance (Option) 200–1,000 mm (1,300 mm optional)
Effective Width Between Columns 2,000 mm
Machine Dimensions (L × W × H) 8,600 mm × 5,100 mm × 5,700 mm (Optional)
Machine Weight (Net) 33,000 kg
Power Source 3-Phase AC 200–480V, 50/60Hz
Required Power Capacity 100 kVA
Compressed Air Pressure 0.54 MPa
Air Consumption 950 NL/min
Spindle Motor Power (S3/Continuous) 55 kW / 37 kW
Maximum Spindle Speed 8,000 rpm
Base Speed 6,000 rpm
Maximum Torque 1,500 N·m
Spindle Drive System Built-in Motor
RAM Size 380 mm × 380 mm
Spindle Taper Type ISO #50, 7/24 Taper
Spindle Clamping Force 60 kN
Spindle Cooling Tank Capacity 21 L
Spindle Air Purge Yes
Table Size (W × L) 1,500 mm × 3,000 mm
Load Capacity 12,000 kg
T-Slots 28H8 × 10 mm (Standard), 24H8 × 10 mm (Optional)
Tool Shank Type MAS403 BT 50 / DIN 69871-A50
Tool Storage Capacity
Standard 40 tools
Optional 60 or 90 tools
Tool Selection Type Fixed Address
Max. Tool Weight 34 kg
Max. Tool Diameter 130 mm (Continuous), 250 mm (Adjacent Pots Empty)
Max. Tool Length 400 mm
Max. Tool Moment 30 N·m
Tool Change Time (T-T-T) 5.5 sec
Lubrication Tank Capacity 13 L
Pump Motor Power 0.057 kW
Discharge Pressure 1.7 MPa
Hydraulic Tank Capacity 25 L
Operating Pressure 9.0 MPa
Flood Coolant Tank Capacity 1,000 L
Coolant Pump Motor Power 1.8 kW
Filtration 20 Mesh
Max. Pressure 0.7 MPa (Standard), 1.45 MPa (Optional)
Max. Flow Rate 30 L/min
Chip Conveyor Hinged Belt Type (Dual Side)
Chip Bucket Capacity 380 L
Oil Skimmer Belt Type (Optional)
90° Angle Head
Max Speed 6,000–12,000 rpm
Power 15/11 kW
Extension Head
Max Speed 6,000 rpm
Power 22 kW
Swing Type 1 Station
Up-Down Type 2 Stations
Table to Spindle Nose Distance 1,300 mm (High Column 300 mm)
Fan Cooler Standard
Air Conditioner Optional
Chip