Clamping Table (X-axis)
Clamping Surface 1,000 x 800 mm
Additional Clamping Surface 200 x 800 mm
Longitudinal Adjustment of the Table 1,000 mm
Additional Adjustment Travel 100 mm
Permissible Table Load 1,500 N
Continuous Sanding Feeds 1 to 2,000 mm/min
Table Grooves 12/100/18 mm (Number/Distance/Width)
Headstock (W- and Y-axis)
Cross Adjustment of the Headstock 800 mm
Additional Adjustment 400 mm
Vertical Adjustment of the Headstock 550 mm
Adjustment Speed Max. 5,000 mm/min
Grinding Feeds 1 to 2,000 mm/min
Clearance Height Over Table Surface 580 mm
Sleeve (Z-axis)
Max. Adjustment Path 120 mm
Oscillating Stroke Length Min./Max. 0.2/118 mm
Oscillating Stroke Speed 6 to 12,000 mm/min
Position Fixing in the Lower End Position +/- 0.001 mm
Planetary Spindle (C-axis)
Planetary Spindle Speed 1 to 250 rpm
Parts Adjustment for Automatic Spindle Alignment Up to 4 pitch (Accessory)
C-axis Operation - Rapid Traverse 50 rpm
C-axis Operation - Feed Max. 20 rpm
Planetary Head (U-axis)
Radial Adjustment of Grinding Spindle
Fine Infeed 9 mm
Integrated Coarse Adjustment 0 to 125 mm
Inclination Angle of the Grinding Spindle Integrated 0 to 7 degrees
Inclination Angle of the Grinding Spindle Movement 0 to 90 degrees
Grinding Spindles
Speed Range of the Frequency Grinding Spindles 4,500 to 120,000 rpm
Power of the Electric Grinding Spindles 1.0 to 0.5 kW