Table Working Surface 1740 mm x 650 mm
Maximum Load on Table 2000 kg
X-Axis 1500 mm
Y-Axis 650 mm
Z-Axis 650 mm
Spindle Nose to Table Top Min 200 mm – Max 850 mm
Spindle Center to Column Cover 665 mm
Machining Capabilities
Drilling Capacity (S45C) Ø 50 mm
Tapping Capacity (S45C) M45 x P4.5
Milling Capacity (S45C) 634 cm³/min
Spindle Unit
Z-Axis Travel (Spindle Unit) 650 mm
Spindle Taper 7/24 Taper No. 50
Spindle Speed
Standard 25 to 6,000 RPM (4-digit S code direct command)
Spindle Motor
Type AC Inverter Controlled Motor
Output
18.5 kW (30 min rating)
15.0 kW (continuous rating)
Table Specifications
Working Surface 1740 mm x 650 mm
T-Slots
Nominal Size 18 mm (ISO R299)
Number of Slots 5
Distance Between Slots 125 mm
Reference Slot Center slot 18H8 +0.027/0 mm
Table Height from Machine Bottom 830 mm
Maximum Table Loading Capacity 2000 kg (evenly loaded)
Automatic Tool Changer (ATC)
Tool Magazine Capacity 30 tools
Tool Shank MAS-BT-50
Max Tool Diameter
With Adjacent Tools Ø125 mm
Without Adjacent Tools Ø260 mm
Max Tool Mass 20 kg (including tool shank and retention knob)
Max Tool Length 400 mm
Chip-to-Chip Time 6.0 s (9.3 s with ATC door)
Tool-to-Tool Time 2.4 s
Accuracy
Positioning Accuracy (X-Axis) ±0.01 mm (full length)
Positioning Accuracy (Y- and Z-Axis) ±0.005 mm (full length)
Repeatability (X, Y, Z-Axis) ±0.0015 mm
Machine Dimensions
Height from Machine Bottom 2943 mm
Floor Space 4445 mm x 4032 mm
Machine Mass 11,000 kg
Power Requirements
Electricity
Voltage 3-phase 200/220 VAC ± 10%
Frequency 50/60 Hz ± 2%
Total Input Power Requirement 36.9/41.9 kVA (Continuous/30 min rating)
Pneumatics
Air Pressure 0.5 MPa
Air Flow Rate
Standard Model 200 l/min (ANR) or more
With Cutting Air Blast 800 l/min (ANR) or more
With Pallet Changer 400 l/min (ANR) or more
With Pallet Changer + Cutting Air Blast 800 l/min (ANR) or more